Executive Summary
This apartment site visit checklist covers everything to check before you book a flat, from the approach road and construction quality to the kitchen, bathrooms, parking, and common areas.
Quick Read
Visit more than once and at different times of the day when exploring residential apartments in Chennai. Check the actual flat, not just the sample flat, compare it with the approved plan, and note every issue before paying the booking amount.
Key Takeaways
- Under RERA, the builder must make the sanctioned plans, layout plans, and specifications available to you at the time of booking.
- A builder must develop the project as per the sanctioned plans and cannot make changes to your flat without your consent, apart from minor changes allowed by law.
- If you pay based on a model apartment or brochure and suffer a loss because it was false, RERA allows you to claim compensation.
Introduction: Look Closer Before You Sign
A brochure shows you the best angle of a home. A site visit shows you the rest: the road you will take every day, the light in the bedroom at 5 pm, and whether the bathroom tap actually has water.
Whether you are browsing apartments for sale in Chennai or anywhere else, one well-planned visit can save you from years of small regrets. This guide works as both a checklist and an apartment inspection guide, so you know what to look at and what to note before you book.
Apartment Site Visit Checklist: What to Inspect During Your Visit
A good site visit covers four things: the area around the project, the flat itself, the shared spaces, and the paperwork that backs up what you see.
What to Carry With You
Go prepared:
- A copy of the brochure and the floor plan of the flat you like
- A measuring tape, to check room sizes against the plan
- Your phone, for photos and a compass app to check which way the flat faces
- A family member or friend, for a second pair of eyes
Also ask to see the sanctioned plans, layout plans, and specifications. Under RERA, the builder has to make these available to you at the time of booking, by displaying them at the site or another place set by the rules.
Sources: RERA Sec 11
Location, Surrounding Area and Connectivity
Location and Surrounding Area
Look at what is around the project: schools, hospitals, grocery stores, and banks. Notice what is next door too: an empty plot today could be a commercial building tomorrow, and a highway can mean noise all day.
In Chennai, ask locals or shopkeepers whether the area or nearby roads flood during the monsoon.
Approach Roads and Connectivity
Check how wide and well-kept the road to the project is, and whether it has streetlights. Note how far the nearest bus stop, metro, or railway station is, and how long the drive to your office takes at peak hours.
Flat Inspection Checklist: Construction Quality, Walls, Flooring, Doors and Windows
If the flat is still being built, inspect the sample flat and also ask to see the tower or a finished floor, since the sample flat is often finished to a higher standard.
Construction Quality
You don’t need to be an engineer to spot warning signs of poor construction quality. Look for cracks in beams, columns, and ceilings, uneven surfaces, and rusted steel rods sticking out on site.
Walls and Flooring
Run your hand along the walls. They should feel smooth and even, with no dampness, bubbling paint, or patches. Tap the tiles of the flooring at a few spots; a hollow sound can mean poor fixing.
Doors and Windows
Open and close every one of the doors and windows. They should move smoothly, shut fully, and lock properly. Check the frames for gaps and the window grills.
Ventilation, Natural Light, Electrical Points and Plumbing
Ventilation
Good ventilation keeps a flat cool and dry, which matters in Chennai’s heat and humidity. Check whether rooms have windows on more than one side so air can flow through. Bathrooms and the kitchen should have a window or an exhaust point.
Natural Light
Switch off the lights and see how much natural light each room gets. Check which way the flat faces and whether a nearby building blocks the sun.
Electrical Points
Count the switches and sockets in every room and check that they match how you will use the space. Ask about the brand of electrical fittings, points for the AC and geyser, and power backup.
Plumbing and Water Supply
Open the taps and flush the toilets to check water pressure and drainage. Look under sinks for leaks. Ask where the water supply comes from (a Metro Water connection, a borewell, or tankers) and how big the storage tanks are.
Kitchen and Bathrooms
In the kitchen, check the counter height and the space for a fridge, a water purifier, and a gas cylinder or piped gas line.
In the bathrooms, check that the floor slopes towards the drain, so water doesn’t collect. Look for damp patches on the wall behind the shower or the toilet, which can mean a hidden leak.
Parking, Amenities, Common Areas, Safety and Maintenance
Parking
Ask whether parking is covered or open, how many slots come with your flat, and whether the slot number will be written in the agreement.
Amenities and Common Areas
Walk through the common areas: the lobby, corridors, lifts, staircases, terrace, and play area. For amenities like a gym, pool, or clubhouse, ask whether they are ready or only planned, and when they will be completed.
Safety Features
Look for fire extinguishers, smoke detectors, fire exits, and clearly marked staircases. Ask about CCTV, security guards, and access control at the gate.
Maintenance
Ask about the monthly maintenance charge and the upfront deposit. Under RERA, the builder is responsible for providing and maintaining essential services, on reasonable charges, until the residents’ association takes over the maintenance of the project.
Sources: RERA Sec 11
Property Walkthrough: Compare the Flat with the Brochure and Plan
A property walkthrough is only useful if you check what you see against what you were promised.
Compare the Actual Property with the Brochure and Plan
Take the floor plan and measure two or three rooms. Check that the carpet area, the position of doors and windows, the balcony size, and the room layout match. Ask the sales team to point out which fittings in the sample flat are standard and which are extras. No apartment inspection guide can replace this simple side-by-side check.
Under RERA, the builder has to develop the project as per the sanctioned plans and specifications, and cannot change the fixtures, fittings, or amenities described for your flat without your consent, except for minor changes allowed by law. And if you pay an advance based on a model apartment, brochure, or advertisement and suffer a loss because the information was false, you can claim compensation.
Record Your Observations Before Booking
Take photos of every room, note the flat number and floor, and write down every issue along with the builder’s answers. Here is a checklist you can print and carry.
Table 1: Apartment site visit checklist
| What to inspect | What to check | Red flag |
| Surroundings | Schools, hospitals, shops, noise | Flooding, open drains, heavy traffic noise |
| Approach road | Width, streetlights, transport | Narrow, broken, or unlit road |
| Construction quality | Beams, columns, ceilings | Cracks, exposed rusted steel |
| Walls and flooring | Smooth finish, level tiles | Damp patches, hollow-sounding tiles |
| Doors and windows | Smooth opening, proper locks | Gaps in frames, doors that don’t shut |
| Ventilation and light | Cross-ventilation, sunlight | Musty smell, dark rooms |
| Electrical points | Enough sockets, AC points | Too few points, loose fittings |
| Plumbing and water | Pressure, drainage, water source | Leaks, no clear water source |
| Kitchen and bathrooms | Floor slope, fittings | Water collecting, damp walls |
| Parking and common areas | Slot details, lifts, lobby | Parking not in writing, too few lifts |
| Safety and maintenance | Fire safety, security, charges | No fire exits, unclear maintenance cost |
| Brochure vs plan | Room sizes, layout | Mismatch with the approved plan |
| Did You Know?Tamil Nadu gets nearly half of its yearly rain, about 48%, during the northeast monsoon from October to December. So a site visit in this season is the best way to see how a project and its roads handle heavy rain. |
Source: IMD Chennai
Sources: RERA Sec 14, RERA Sec 12
Site Visit Tips Before You Book
A few simple site visit tips can make your visits far more useful:
- Visit at least twice: once on a weekday at peak hours and once at a different time, so you see traffic, noise, and light at their worst and best.
- Go after heavy rain if you can: this shows you drainage and waterlogging problems a dry day won’t.
- Don’t book on the first visit: take your notes home, compare, and come back with questions.
Looking at homes in the southern suburbs? You can try this checklist on our flats in Tambaram.
Visit an LML Homes Project
LML Homes builds 2, 3, and 4 BHK apartments across Tambaram, Kattupakkam, ECR, and OMR, and almost all of our projects have been delivered on schedule. We are a CREDAI member and were named Trusted Developer of the Year (Residential) at the ET Excellence Awards in 2026. Still, the best way to judge any builder, including us, is to walk the site with this checklist in hand.
Final Thoughts
A site visit is your best chance to see a home as it really is, before any money changes hands. Use this flat inspection checklist, take your time, ask every question, and write it all down. If you are buying for the first time, also read about the biggest mistakes first-time home buyers make. follow us in IG @lml homes
Frequently Asked Questions
1. What should I check during an apartment site visit?
Check the location, approach road, construction quality, ventilation, natural light, water supply, kitchen, bathrooms, parking, common areas, and safety features. Also compare the flat with the approved plan.
2. What questions should I ask during a site visit?
Ask for the RERA number and possession date, the carpet area and total price with all charges, which fittings are standard, the water source, power backup, parking details, and the monthly maintenance charge.
3. How many times should I visit an apartment before buying?
Visit at least twice, at different times of the day. A weekday visit at peak hours shows traffic and noise, while a morning or evening visit shows how much natural light the flat gets.
4. What construction defects should I look for?
Look for cracks in walls, beams, and ceilings, damp patches, hollow-sounding or uneven tiles, doors and windows that don’t shut properly, leaking taps or pipes, and bathroom floors where water collects instead of draining.
5. Should I inspect the neighbourhood during a site visit?
Yes. Walk around the area, check the approach road, and see how close schools, hospitals, shops, and transport are. Ask locals whether the area floods during the monsoon.